1 - 28 of 1,001 Listings
Rent
All
AFM 311
Chisel Ploughs
NZD $12,135
(GST applies to buyers in Australia)
Serial Number: 31033
Condition: Used
Stock Number: C01195
Description: AUSTRALIAN FARM MACHINERY 9 TINE HEAVY DUTY CHISEL PLOUGH, 10" SPACING, SPRING TINES. $11,000.00 INC GST
Updated: Tuesday, April 07, 2026 10:25 pm
Location: Dubbo, New South Wales, Australia
Seller: Hydraulics & Tractor Service P/L
Serial Number: X
Condition: Used
Stock Number: 17714
Description: 2023 Bednar Terraland TO 4000 HM Deep Ripper. Serial No BFMT40HML02367615. Demo model with, Hydraulic tyne, Rear spiky double roller 400 + 245mm lo...
Updated: Tuesday, May 05, 2026 01:22 am
Location: Moree, New South Wales, Australia
Seller: Moree Realestate
Serial Number: TO6000
Condition: New
Description: - Super deep ripper! Rips down to 60cm (24 inches)
- One pass operation to super deep rip, mix clay, and incorporate lime that also packs the surf...
Updated: Tuesday, May 12, 2026 05:02 pm
Location: Northam, Western Australia, Australia
Seller: Powerace
2002 CASE IH PTX600
Chisel Ploughs
NZD $42,714
(GST applies to buyers in Australia)
Width: 12.19 m
Serial Number: CBJ0014147
Condition: Used
Stock Number: 51249
Description: Case IH PTX600 Bar, 40ft, 10” spacing, c/w Manutec walking Presswheels, Maxipoint points, Primary Sales boots, single sowing kit, 2002 model, good ...
Updated: Wednesday, June 03, 2026 12:19 am
Location: Crystal Brook, South Australia, Australia
Seller: Rocky River Ag
Serial Number: X
Condition: Used
Stock Number: JJ01355
Description: 3PL Ripper wit Coulters (JJ01355)
Updated: Tuesday, June 02, 2026 07:47 pm
Location: Carisbrook, Victoria, Australia
Seller: Maryborough Machinery
Serial Number: X
Condition: Used
Stock Number: JJ01302
Description: 7 Tyne Connor Shea Chisel Plough
Updated: Tuesday, June 02, 2026 07:47 pm
Location: Carisbrook, Victoria, Australia
Seller: Maryborough Machinery
1900 FLEXI-COIL ST820
Chisel Ploughs
NZD $88,098
(GST applies to buyers in Australia)
Serial Number: X
Condition: Used
Stock Number: 11329
Description: FLEXICOIL ST820 PLANTER. 12 inspacings, Manutech Press wheels, 650 trips. No seed cart included. Located near Gurley NSW. Available at MRE Auctions...
Updated: Tuesday, April 07, 2026 10:38 pm
Location: Moree, New South Wales, Australia
Seller: Moree Realestate
GESSNER HR1200
Chisel Ploughs
NZD $113,460
(GST applies to buyers in Australia)
Condition: Used
Stock Number: BE05892
Description: Gessner Chisel Plough, trailing, 2016 model, rigid tyne chisel plough, 12.8m (42ft) working width, 3 section folding bar, good condition, near Toow...
Updated: Thursday, May 28, 2026 06:59 pm
Location: Toowoomba, Queensland, Australia
Seller: Buck Equipment
2023 GROUND BREAKER BLUE HEELER
Chisel Ploughs
NZD $78,755
(GST applies to buyers in Australia)
Condition: Used
Stock Number: BE05901
Description: Ground Breaker Blue Heeler Chisel Plough, 2023 model (never used), trailing, old display stock, 4 metre frame width, hydraulic depth control, 5 x H...
Updated: Thursday, May 28, 2026 06:59 pm
Location: Toowoomba, Queensland, Australia
Seller: Buck Equipment
HORWOOD BAGSHAW HB2721
Chisel Ploughs
NZD $12,135
(GST applies to buyers in Australia)
Serial Number: FF80248
Condition: Used
Stock Number: JJ01029
Description: Horwood Bagshaw Chisel Plough
11 Tyne
Updated: Tuesday, June 02, 2026 07:47 pm
Location: Carisbrook, Victoria, Australia
Seller: Maryborough Machinery
JOHN BERENDS 11 TINE - 0326
Chisel Ploughs
NZD $17,984
(GST applies to buyers in Australia)
Condition: New
Description: Designed for shattering compact ground with minimal disturbance to the surface. Ideal
for ripping hard ground prior to cultivation and for aerati...
Updated: Monday, May 25, 2026 11:40 pm
Location: Dandenong South, Victoria, Australia
Seller: John Berends Implements
Condition: New
Does Not Work: Operable
Description: Call for Price
Berends
Deep Tillage Plough
Designed for ripping compact ground prior to cultivation and for aerating pastures with minimal...
Updated: Thursday, May 07, 2026 05:40 pm
Location: Dandenong South, Victoria, Australia
Seller: John Berends Implements
JOHN BERENDS STUMP JUMP
Chisel Ploughs
NZD $4,939
(GST applies to buyers in Australia)
Condition: New
Description: Stump Chisel Plough
• Primary cultivator for penetrating hard ground
• 75 x 75 x 6mm main frame
• Adjustable spring provides chiseling action
•...
Updated: Monday, May 25, 2026 11:40 pm
Location: Dandenong South, Victoria, Australia
Seller: John Berends Implements
JOHN BERENDS STUMP JUMP
Chisel Ploughs
NZD $4,041
(GST applies to buyers in Australia)
Condition: New
Description: • Primary/secondary cultivator for penetrating hard ground without bringing subsoil to the surface
• 100 x 100 x 6mm main frame
• 30mm square hig...
Updated: Thursday, May 07, 2026 05:40 pm
Location: Dandenong South, Victoria, Australia
Seller: John Berends Implements
JOHN BERENDS STUMP JUMP
Chisel Ploughs
NZD $3,774
(GST applies to buyers in Australia)
Condition: New
Description: Berends - Cultivator
Rigid Tine Chisel Plough
• Primary cultivator for penetrating hard ground in clean country. Ideal in lighter sandy soils....
Updated: Thursday, May 07, 2026 05:40 pm
Location: Dandenong South, Victoria, Australia
Seller: John Berends Implements
2024 JOHN SHEARER FOLDING WING TRASHWORKER 23
Chisel Ploughs
NZD $279,100
(GST applies to buyers in Australia)
Serial Number: 170619A
Condition: Used
Number of Shanks: 25
Shank Spacing: 12 cm
Field Ready: Yes
Mounting Type: Pull-Type
Description: BRAND NEW JOHN SHEARER Trashworker, 25 Tyne on 12" spacing, 1000LB breakout with Shearer mounted Airseeder....$253,000.00 inc GST
Updated: Monday, April 27, 2026 04:35 pm
Location: Dubbo, New South Wales, Australia
Seller: Hydraulics & Tractor Service P/L
2024 JOHN SHEARER FOLDING WING TRASHWORKER 23
Chisel Ploughs
NZD $172,314
(GST applies to buyers in Australia)
Serial Number: 170619
Condition: New
Stock Number: N01248
Number of Shanks: 25
Shank Spacing: 30.48 cm
Field Ready: Yes
Description: BRAND NEW JOHN SHEARER Trashworker, 25 Tyne on 12" spacing, 1000LB breakout....$156,200.00 inc GST
Updated: Tuesday, May 12, 2026 05:55 pm
Location: Dubbo, New South Wales, Australia
Seller: Hydraulics & Tractor Service P/L
JOHN SHEARER FOLDING WING TRASHWORKER 35
Chisel Ploughs
NZD $33,371
(GST applies to buyers in Australia)
Condition: Used
Stock Number: BE05819
Description: John Shearer Trashworker Chisel Plough, trailing, 3 section hydraulic fold, 35 tyne, 12 inch spacing, 35ft coverage, air kit, new tyres, all new hy...
Updated: Thursday, May 28, 2026 06:59 pm
Location: Toowoomba, Queensland, Australia
Seller: Buck Equipment
JOHN SHEARER FOLDING WING TRASHWORKER 35
Chisel Ploughs
NZD $12,013
(GST applies to buyers in Australia)
Condition: Used
Stock Number: BE05743
Description: John Shearer Harrows, trailing, 45 foot, hydraulic lift, manual fold, good condition, near Toowoomba QLD, includes GST
For more information on this...
Updated: Thursday, May 28, 2026 06:59 pm
Location: Toowoomba, Queensland, Australia
Seller: Buck Equipment
Condition: New
Stock Number: MAN099
Description: NEW 2022 MANDAM 3PL HEAVY DUTY 3.0M DOUBLE SPRUNG TINE CULTIVATOR. 10 TYNES SPACED AT 30CM WITH REAR CLEANUP DISCS FOLLOWED BY A V-RING ROLLER TO B...
Updated: Wednesday, June 03, 2026 09:17 pm
Location: Colac West, Victoria, Australia
Seller: Greg Allan Farm Machinery
Serial Number: X
Condition: Used
Stock Number: 25714
Description: NEW HOLLAND FLEXICOIL ST830,. S/N: PNL0006030, 47working width, double fold, 12 inspacings, 350lbs breakout, single shoot, Flexicoil gang press whe...
Updated: Friday, May 29, 2026 08:39 am
Location: Moree, New South Wales, Australia
Seller: Moree Realestate
YEOMANS E99-LS/2
Chisel Ploughs
NZD $3,398
(GST applies to buyers in Australia)
Width: 2.75 m
Serial Number: 897612689
Condition: Used
Number of Shanks: 11
Length: 140 cm
Height: 114 cm
Description: second-hand YEAOMANS 11tyne Chisel Plow
TPL
fitted with feed down points
overall width - 2.75m
working width - 2.54m
length (depth) - 1.4m
...
Updated: Friday, May 01, 2026 11:29 am
Location: Glen Innes, New South Wales, Australia
Seller: Sharman Machinery
YEOMANS J10
Chisel Ploughs
NZD $3,640
(GST applies to buyers in Australia)
Serial Number: 147988
Condition: Used
Stock Number: C01267
Field Ready: Yes
Mounting Type: Pull-Type
Harrow: Yes
Description: YEOMANS 8 tine chisel plough....$3,300.00 inc GST
Updated: Tuesday, April 07, 2026 10:25 pm
Location: Dubbo, New South Wales, Australia
Seller: Hydraulics & Tractor Service P/L
Serial Number: 2745
Condition: Used
Frame Type: 1-Section
Description: 12ft chisel. Selling as is
Isaac 785_ 332_4902 text
Updated: Thursday, May 28, 2026 06:54 am
Location: Bird City, Kansas, USA
Seller: Bar Z Supply
Width: 2.44 m
Serial Number: N/A
Condition: Used
Stock Number: CRAIG C
Frame Type: 1-Section
Description: Used pasture chisel
6 shank with disk
Seller can load
Updated: Thursday, May 28, 2026 06:54 am
Location: Mexia, Texas, USA
Seller: Kennedy Auctions
Serial Number: UNKNOWN
Condition: Used
Description: International 55 chisel plow
selling for local retirement
Very nice but will need tires
NO BUYERS PREMIUM
SELLS AS IS
Inspect before you bi...
Updated: Thursday, May 28, 2026 06:54 am
Location: David City, Nebraska, USA
Seller: Kobza Online Auctions
Width: 3.35 m
Serial Number: 16317
Condition: Used
Mounting Type: Pull-Type
Frame Type: 1-Section
Description: Jeoffroy MFG Chisel Plow
- 11' Wide
- Pull Type
- C Shank
- Ready to work
- Owners are selling the ranch and equipment
- Payment and pick...
Updated: Thursday, May 28, 2026 03:24 pm
Location: Whitehall, Montana, USA
Seller: Mainwest Equipment
Width: 3.96 m
Serial Number: UNKNOWN
Condition: Used
Description: 13' INTERNATIONAL CHISEL PLOW
- Located in Avon, SD
- This item is part of a larger liquidation auction. To view the full line-up click "consignm...
Updated: Thursday, May 28, 2026 06:54 am
Location: Avon, South Dakota, USA
Seller: Elting Auction Co.